Dissolving acetylene plant is the production of gaseous acetylene after purification, compression, filled to acetylene cylinder containing acetone, so that acetylene gas dissolved in acetone, acetylene gas released from acetone. After its production process: crushing, between 10-200 - mm calcium carbide to occur from the cistern to add water to overflow open starter generator, the calcium carbide to charging platform, with a purity of 98% or more nitrogen purging guide tube feeding, down cap feeding, then cap timely reset, calcium carbide and water produces chemical reaction, generate acetylene gas, After scrubber and water seal, remove the residue and impurities, and enter the gas holder, water separator and low pressure dryer after cooling. Removal of a certain water acetylene into acetylene compressor compression, via high pressure of high pressure separator and dryer again, further removal of acetylene gas oil and water to ensure that the acetylene gas purity of 98% or higher, under pressure from compressor, acetylene gas into the pump discharge, repackaging into the acetylene cylinders on both sides, can transport to use only after it has been stationary.

Specification Item	RY-20	RY-40	RY-80	RY-120	RY160	RY-240	RY-360
Acetylene output m3/h	20	40	80	120	160	240	360
Acetylene purity %	≥98	≥98	≥98	≥98	≥98	≥98	≥98
H2S and PH3contents（10%AgNO3solution color）	Colorless	Colorless	Colorless	Colorless	Colorless	Colorless	Colorless
Extraction rate of acetylene%	≥90	≥90	≥93	≥93	≥95	≥96	≥96
Filling pressure Mpa	≤2.5	≤2.5	≤2.5	≤2.5	≤2.5	≤2.5	≤2.5
Water consumption (except emergency)	3	4	6	7	8	10	13
Installed capacity KW（380V,50H)	5.5	11	22	33	44	66	90