Air compressor is an indispensable part of oxygen generator for industry，screw air compressor air filter element replacement maintenance operation
1. The user who has removed the air filter element will know that there will be a circle of bolts around the empty filter element. At this time, it is necessary to loosen the peripheral screws carefully and remove the empty filter element;
2. After the demolition is complete, carry out a careful inspection around the old air filter element. If the damage degree of the surface of the filter element is quite serious or the oil above is some oil, then it needs to be replaced immediately. If there is no need to replace it, it is recommended to blow ash under 0.3 mpa pressure at this time. Note that it is not blowing with the mouth, nor is it the use of other professional tools. It is recommended to use compressed air, so that the air filter element of the screw air compressor can be blown inside and outside without omission in all aspects;
3. After these steps are complete, restore the scene and check whether the value of the pressure switch is normal.
oxygen generator for industry screw air compressor in the maintenance process need to pay attention to a lot of matters, such as screw air compressor in each different maintenance cycle need to do what work, and forget to maintain screw air compressor opportunity cause what harm, etc. So technical personnel in the use and maintenance process to pay more attention to some.