Features: SKID-MOUNTED, AIR-COOLED, HIGH PURITY OXYGEN, SCREW COMPRESSOR, TURBINE EXPANDER，LIQUID OXYGEN PUMP, SET EXTERNAL CLEANING TOWER SYSTEM, WATERPROOF PERLITE, AUTOMATIC PROTECTION OF POWER OFF, EASY INSTALLTAION, EASY OPERATION, EASY MAINTENANCE, COULD DESIGN ACCORDING TO THE USER SPECIAL REQUIRMENT.

Precooling system: The precooling system is to remove most of the moisture in the compressed air and ensure that the temperature of the compressed air into the purifier is controlled at 8 degrees. We adopt the high-efficiency energy-saving precooling system which only needs one button to start without any operation. The system automatically controls the outlet temperature according to the ambient temperature and no maintenance is required.

Precooling machine provides inlet and outlet temperature of compressed air, condensing and evaporating pressure of compressor, system working state is clear at a glance.

It is equipped with voltage protection system, power low-voltage automatic protection of over-voltage phase sequence error, compressor automatic protection system to ensure the stable operation of equipment for a long time.

Product specifications

Large and medium-sized oxygen production air separation device partition type: cold and hot two fluids are separated by heat transfer walls, and do not contact each other during heat transfer. Heat is transferred from hot fluid to cold fluid through the wall, such as tube type and plate type. Heater. Heat storage type: The cold and hot fluids alternately flow through the solid heat storage body with sufficient heat. When the hot fluid flows through, the heat storage body absorbs heat. When the cold fluid flows through, the heat storage body releases heat, thereby achieving cold and Heat transfer of hot fluids. The water injection hole of the chilled water distributor of the large and medium-sized oxygen air separation unit is blocked, causing the water level in the chilled water return tank to overflow to the riser mouth, and part of the water is carried into the purifier by the air; excessive water spray or water separation device (Including the water separation layer set on the top of the tower or a separate water separator) Poor separation effect can also lead to water

Buy our Liquid Oxygen Plant products and you can use them with confidence. If there is a quality problem, we will send you a new one or send an engineer for maintenance free of charge. At present, perfect after-sales service like this gives our company one of the advantages in this industry. One, because we believe that whether a company can win the trust of many new and old customers for a long time depends not only on product quality, but also on after-sales service. Therefore, we have an experienced and professional after-sales team.