Features: SKID-MOUNTED, AIR-COOLED, HIGH PURITY OXYGEN, SCREW COMPRESSOR, TURBINE EXPANDER，LIQUID OXYGEN PUMP, SET EXTERNAL CLEANING TOWER SYSTEM, WATERPROOF PERLITE, AUTOMATIC PROTECTION OF POWER OFF, EASY INSTALLTAION, EASY OPERATION, EASY MAINTENANCE, COULD DESIGN ACCORDING TO THE USER SPECIAL REQUIRMENT.

The fractionating tower is all filled with waterproof perlite, which has good cooling effect and guarantees the start-up time of normal oxygen production.

Reduce energy consumption.

Description: Due to the physical properties of porous particles inside the perlite, it has a good heat preservation and cold preservation effect.

However, in general, due to the low internal temperature of the fractionating tower, as the internal temperature of the fractionating tower gradually decreases, according to the principle of thermal expansion and contraction, the fractionating tower produces negative pressure adsorption to the outside hot air, so that the moisture in the air slowly penetrates into the fractionating tower, As the temperature decreases, perlite forms ice cubes, so the anti-condensation effect of the fractionating tower will decrease, and the decrease will extend the time of oxygen production or oxygen production.

Product specifications

In the condensing evaporator, the liquid oxygen from the bottom of the upper tower is heated and evaporated by the gas nitrogen at the top of the lower tower, and part of it is discharged as oxygen products, and part of it is used as rising gas to participate in the rectification of the upper tower, and the gas nitrogen is discharged Thermally condenses into liquid nitrogen, partly as reflux liquid to participate in the rectification of the lower column, and partly as a throttling at the top of the upper column to participate in the rectification of the upper column. This shows that in the condensing evaporator, the temperature of gas nitrogen is higher than that of liquid oxygen. In normal operation, the circulating flow and temperature are restricted by the temperature conditions of the switch-over heat exchanger, and there should not be too much change in the case of a certain amount of air. When adjusting the amount of refrigeration needs to change the amount of expansion, it is mainly to adjust the ventilation of the gas tower.

Common problem

1.What If my product has a problem after I receive it?

-If there’s a problem about quality, we’ll send you new one or send engineer to maintain it for free. Problems or damage caused by other factors are beyond our scope of responsibility.

2. Do you have any customers in our country? Can you share their

names?

-Sorry, we are not able to disclose their names because they require privacy and have signed a NDA agreement with us. We owe a dyty of care to our clients to prevent any risk of harm. Only if we get the agreement of our customer, we can tell you his/her/their names. Thanks for your understanding.