Mob1: +8618709851061
Mob2: +8613700305379
Iranian cooperation customers want to purchase the product, can the sincerity with our company for negotiating process, we are willing to cooperate with the, so actively invite ...
This is our myanmar customer cooperation, customers want to purchase products and field trips to factory, our company staff for their very warm entertain clients, and bring cust...
The rising steam quantity of the tower and the condensation amount in the condenser evaporator of the air separation equipment factory are reduced, which also have certain influ...
In the plate type 6000m3 / h air separation plant, the air flow is only 33000m3 / h, while the annular flow is 5200m3 / h, resulting in air liquefaction at the cold end of the s...
The increase of pressure difference of air separation equipment manufacturer will not cause the expansion of the temperature difference at the hot end. When the tubules of the h...
In normal production, the air pressure (e.g. 2.0MPa) is lower than the critical pressure, the corresponding saturated steam temperature is 119k (- 154 ℃), and the specific entha...
After the accumulator runs for a period of time, due to the impact of air flow back and forth, the filled pebbles will gradually be compacted and sink.
The more water is allowed to evaporate, the more evaporation latent heat is absorbed, and the lower the temperature of cooling water out of the cooling tower.
In order to reduce the moisture brought into the purifier (or dryer) by the heating gas and ensure the service life of the purifier (or dryer), the heating pressure of the purif...